SWM SM 500 R E4 2018 Manual - Uso - Mantenimiento página 113

RESERVOIR REMOVAL
- Remove the saddle and lateral panels as
described in the relevant paragraphs.
- Unscrew the two conveyor lower screws (1).
- Unscrew the reservoir upper clamping screw (2)
and detach the tank vent hose (3).
- Position a rag under the quick coupling (4) of the
fuel pipe; press the coupling (4) and detach the
fuel pipe.
- Lift the reservoir slightly from the rear and
disconnect the fuel pump connector (5).
- Lift and remove the reservoir (6).
Note*: On re-mounting the reservoir, make
sure that the reservoir fuel pipe, with relative
fitting (4), passes inside the frame.
3
1
2
4
4
5
6
EN - 35