Digital Instrument, Warning Lights - SWM SM 500 R E4 2018 Manual - Uso - Mantenimiento

DIGITAL INSTRUMENT, WARNING LIGHTS

The motorcycle is equipped with a digital instru-
ment with 5 indicator lights: high-beam headlight,
engine malfunction, direction indicators, neutral,
and ABS.
1) High-beam light (BLUE).
Turns on when the low-beam headlights are acti-
vated.
2) Engine malfunction indicator light
Turns on when the engine is not functioning prop-
erly; in this case, it is recommended to visit an
SWM service centre as soon as possible.
The indicator light turns off once the malfunction
has been resolved.
3) Turning indicator light (GREEN).
Starts flashing when the right or left direction in-
dicator is activated.
EN - 12
4) Neutral warning light
Turns on when the gear shift lever is in the neutral
position.
5) ABS warning light
Starts flashing when the rear wheel's ABS func-
tion is deactivated.
Remains on if an ABS system malfunction is de-
(ORANGE).
tected; in this case, it is recommended to visit an
SWM service centre as soon as possible.
The indicator light turns off once the malfunction
has been resolved.
NOTE:
- The display check will be carried out for the first
few seconds after turning the key; once the check
phase has been completed, the instrument will
display the last function set.
- When the engine is turned off, the instrument
does not show any functions.
- To select instrument functions and reset func-
tions, use the SCROLL button (A)
(GREEN).
(ORANGE).
ABS
2
4
5
- The functions, which can be selected in order are
as follows:
1- SPEED / ODO / FUEL
2- SPEED / H / FUEL
3- SPEED / CLOCK / FUEL
4- SPEED / TRIP 1 / FUEL
5- SPEED / STP 1 / FUEL
6- SPEED / AVS 1 / FUEL
7- SPEED / SPEED MAX / FUEL
8- SPEED / TRIP 2 / FUEL
9- TRP 2 / CLOCK / FUEL
10- SPEED / RPM (engine r.p.m. numerical value) /
FUEL
.................
1
3
A