Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 12

If you are using a RS-422 device to control playback and recording remotely,
press the 'rem' button. This will allow the your HyperDeck to be controlled
externally from a device such as the HyperDeck Extreme Control or the
HyperDeck Ethernet Protocol. The button will illuminate to indicate the
remote feature is active.
The five transport control buttons including the most commonly used
functions for recording and playback; record, stop, play, fast forward and
rewind. Use these buttons for immediate control over the record and
playback functions.
When active the selected button will illuminate.
3D LUT lets you toggle the active display LUT on the HDR LCD display.
The button will illuminate when active.
For more information on LUTs, including how to set your LUT and display it on
the LCD and or monitor out, see the 'LUTS' tab in the dashboard menu later in
this manual.
NOTE It is worth noting that if the unit does not have a valid signal
connected, pressing the 'record' button has no effect on the unit. This is the
same for the play and fast forward and rewind buttons when no storage
media is connected.
3 Headphone Port
Connect a set of headphones to the 1/4" headphone jack on the front panel to listen to
the audio. To change the headphone volume level, tap on the volume meters on the
touchscreen display and adjust the 'headphone level' slider.
4 Touchscreen
The 7" LCD display features a large ultra bright HDR video display with intuitive
touchscreen controls. The wide color gamut displays both Rec. 2020 and Rec. 709
color spaces and 100% of the DCI-P3 format. You can also display full screen video
scopes. You can access all available on screen controls and menu options via the
touchscreen display!
For more information on the menu settings and using the touchscreen, see the
'touchscreen display' section further in this manual.
5 CFast 2.0 Card Slots
2 CFast slots on the front of the panel for your CFast cards. LED lights to the right of the
slot indicate the media status.
Playback
Recording or while cache is transferring
Card is ready or no card is installed
HyperDeck Extreme 8K HDR Front Panel 12