Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 18

Grid
The grid view display provides three overlays to assist with shot framing. There are
three different views available on the HyperDeck Extreme 8K HDR to assist with
shot framing.
Thirds Thirds will overlay two horizontal and two vertical lines over your image,
breaking it up into 9 smaller sections to help you compose your shot.
The human eye typically looks for action near the points where the lines
intersect, so it's helpful to frame key points of interest in these zones.
An actor's eyeline is commonly framed along the top third of the screen,
so you can use the top third to guide your framing.
Crosshairs The 'crosshairs' setting places a crosshair in the center of the frame.
Like thirds, the crosshairs is a very useful compositional tool, making it
easy to frame the subject of a shot in the very center of a frame. This is
sometimes used when filming scenes that will be assembled using very
fast cuts. Keeping viewers' eyes focused on the center of a frame can
make rapid editing easier to follow.
Center Dot The 'center dot' setting places a dot in the center of the frame. This works
in exactly the same way as the 'crosshair' setting, albeit with a smaller
overlay that you may find less intrusive.
You can enable a combination of 'thirds' and 'crosshairs' or 'thirds' and
'center dot' by tapping both options in the 'grids' menu. 'Crosshairs' and
'center dot' cannot be selected together.
Touchscreen Display 18