Storage Media; Cfast Cards - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

The LUT will now appear in the list and once you make it active your can apply it to the LCD and
external monitor.
NOTE If you try to import a LUT that already exists, a screen will prompt you to either
keep both or replace the existing LUT.

Storage Media

The HyperDeck Extreme 8K HDR can record to CFast cards via the two front panel slots or
external storage connected via the rear USB-C port. With Blackmagic MultiDock 10G, you can
have 4 SSD's connected at once!
Depending on your workflow and desired recording resolution, you may already have CFast
cards or external disks fast enough to use. For example, standard definition workflows, such as
archiving from Digital Betacam to file, will not require the fastest media. For workflows recording
the highest resolutions, such as 8K video, media with higher write speeds is required.
TIP The following approved media is based on recording 8K video to HyperDeck
Extreme without the optional cache installed.

CFast Cards

When working with high data rates it is important to carefully check the CFast card you would
like to use. This is because CFast 2.0 cards have different read and write speeds. The tables
below identify the CFast cards recommended for use.
Choosing a CFast 2.0 Card
The following CFast 2.0 cards are recommended for recording 8K Apple ProRes LT up
to 60 fps.
Brand
Wise
Wise
The following CFast 2.0 cards are recommended for recording 8K H.265 High up to 60 fps.
Brand
Cinedisk Pro
KomputerBay
ProGrade Digital
ProGrade Digital
ProGrade Digital
Card Name
CFast 2.0 3500X
CFast 2.0 3500X
Card Name
CineDisk Pro 510MB/s
KomputerBay 3600X
ProGrade Digital 550MB/s
ProGrade Digital 550MB/s
ProGrade Digital 550MB/s
Storage
512GB
1TB
Storage
256GB
64GB
128GB
256GB
512GB
Storage Media 41