Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 700

Video Formats
The following video formats are currently supported on HyperDeckExtreme 8K HDR:
NTSC, PAL, NTSCp, PALp
720p50, 720p5994, 720p60
1080p23976, 1080p24, 1080p25, 1080p2997, 1080p30
1080i50, 1080i5994, 1080i60
4Kp23976, 4Kp24, 4Kp25, 4Kp2997, 4Kp30
4Kp50, 4Kp5994, 4Kp60
Video format support may vary between models and software releases.
File Formats
HyperDeck Extreme 8K HDR supports the following file formats:
H.264Low
H.264Medium
H.264High
QuickTimeProResHQ
QuickTimeProRes
QuickTimeProResLT
Supported file formats may vary between models and software releases.
Querying and updating configuration information
The "configuration" command may be used to query the current configuration of the deck:
configuration↵
The server returns the configuration of the deck:
211 configuration:↵
audio input: {"embedded" , "XLR" , "RCA"}↵
video input: {"SDI" , "HDMI" , "component"}↵
file format: {File format}↵
↵
One or more configuration parameters may be specified to change the configuration of the deck.
To change the current video input:
configuration: video input: {"SDI" , "HDMI" , "component"}↵
Valid video inputs may vary between models. To configure the current audio input:
configuration: audio input: {"embedded" , "XLR" , "RCA"}↵
Valid audio inputs may vary between models.
To configure the current file format:
configuration: file format: {File format}↵
Note that changes to the file format may require the deck to reset, which will cause the client connection to
be closed. In such case, response code 213 will be returned (instead of 200) before the client connection is
closed:
"213 deck rebooting"
Asynchronous configuration information change notification is disabled by default and may be configured
with the "notify" command. When enabled, changes in configuration will generate a "511 configuration:"
asynchronous message with the same parameters as the "211 configuration:" message.
Информация для разработчиков 700