Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 48

If you are using a dock to connect multiple external disks, such as the Blackmagic
MultiDock 10G, you can access the full list of attached drives by tapping on the 'drive
list' button.
To select an active drive from the drive list:
1 Tap on the 'drive list' button.
2 Select the drive from the list. The selected drive is indicated by the vertical blue line
to the left of the name. Press exit to return to the previous screen.
The blue line on the left hand side indicates which drive is selected.
NOTE Spill recording is available when multiple cards and drives are connected. Your
HyperDeck Extreme 8K will automatically spill recording from one CFast card to
another when it is full. Once the second CFast card is full, recording will spill over to
the active external disk.
Storage Media 48