Lower Toolbar - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

TIP If your video scopes aren't appearing when you switch them on, make sure
'scopes' is enabled in the monitor page of the dashboard menu. For more information,
see the 'monitor settings' section later in this manual.
Menu
The last icon on the top row is the menu icon where you can access the dashboard menu.
This dashboard menu is where you can access to all the recording options including source and
codec, audio channels, monitor options audio preferences and more.
Tap on the menu icon to open the dashboard menu.
For more information on menu options available, see the 'dashboard' section later in
this manual.

Lower Toolbar

Transport Controls
The first five icons on the bottom left of the display are your touchscreen transport controls.
The function of these buttons can depend on whether you are in 'record' mode or
'playback' mode.
The 'record', 'play' and 'stop' buttons work just like they do on the front panel.
To start recording, tap the 'record' button once and both the touchscreen
and front panel record buttons will illuminate red. To stop recording, tap the
'stop' button.
To view your recently recorded clip, tap the 'play' button. You will now be in
'playback' mode. The touchscreen 'play' button will illuminate blue and the
soft touch play button on the left of the front panel will illuminate green.
Pressing 'stop' will stop the HyperDeck Extreme recording. If you press 'stop'
while in playback mode, playback will stop and a clip timeline will appear
above the transport controls. Similar to a timeline in editing, it's a visual
representation of all the clips on your timeline with a playhead indicating your
current playback position.
Touchscreen Display 23