Getting Started With Hyperdeck Extreme 8K Hdr; Plugging In Power - Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento

Getting Started with
HyperDeck Extreme 8K HDR
This section of the manual shows how to get started using your HyperDeck Extreme 8K HDR.
Getting started is as simple as connecting power, plugging in your video and audio, inserting
a formatted CFast card and pressing the record button! You can then stop recording and play
back your files using the built in touchscreen or transport control buttons on the front panel.
However, you can also connect Blackmagic HyperDeck Extreme Control and operate your
HyperDeck remotely. This is a powerful external controller with many features including a
search dial for precise jog and shuttle control. An entire section dedicated to HyperDeck
Extreme Control is provided later in this manual.

Plugging in Power

To power your HyperDeck Extreme 8K HDR, connect a standard IEC cable to the AC power
input on the rear of the unit. You can also use the 12V DC input if you want to connect external
power or redundancy via an external power supply, for example an uninterruptible power
supply or external 12V battery.
Connect power to the AC or DC power inputs on the rear of the unit
Getting Started with HyperDeck Extreme 8K HDR 5