Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 31

Display 3D LUT
Toggles display LUTs on and off to your LCD or monitor SDI. The toggle appears
disabled when no LUT is active. For information on how to set a LUT, see the LUTs
section later in this manual.
Monitor Settings – LCD and SDI
The LCD and SDI setting features controls for focus assist
as well as options for anamorphic displays
You can adjust the appearance of focus assistance settings using the 'LCD and SDI' tab. These
options affect the look of both the LCD display and the SDI monitor output.
Focus Assist Type
There are two focus assist modes, 'peak' and 'colored lines'.
Peak
Colored Lines
Focus Assist Color
When you are using colored lines for focus assistance on your LCD display or
SDI monitor out, you can select your preferred color for the lines from red, blue, white
or green. Changing the color can help to make your area of focus stand out more.
Anamorphic De-squeeze
The anamorphic de-squeeze option allows you to correctly display horizontally
squeezed images from any anamorphic sources, such as digi-beta tapes containing
anamorphic 16:9 content or anamorphic lenses. Tap 'none' for non anamorphic sources.
When you select focus peaking the areas within your frame with the
highest contrast will be highlighted.
If colored lines is selected, lines will be super imposed over any part of
the image in focus. This can be a more visually intrusive than using 'peak'.
Settings 31