Blackmagic Design HyperDeck Extreme 8K HDR Manual De Instalación Y Funcionamiento página 17

Use the slider or arrow to select your zebra percentage
TIP You can also set the zebra to highlight areas of your image that represent
specific video levels on a waveform, for example setting the zebra for 50%
means you can visually identify which regions of your image will appear at
approximately 50% on a waveform scope.
Focus Assist
Focus assist gives you powerful tools to help focus your image fast. Focus assist
displays edge lines on the sharpest areas of the image. To turn on focus assist, toggle
the switch to on. Sensitivity settings let you change how strong the lines are from 'low',
'medium' or 'high'. In images with lots of detail and high contrast, the lines can be
distracting, so in these conditions you can select 'low' or 'medium'.
Alternatively, for low contrast shots with less detail, select 'high' so the lines are
stronger and easier to see. If you find lines are too visually intrusive, you can select
'peak' levels instead. For more information on how to set peak levels, see the 'monitor'
settings later in this manual.
Frame Guides
Guides provide a range of aspect ratios from various film, television and online
standards. Tap the toggle switch to on and then select your guide by tapping the left
and right arrows or by dragging the slider control.
Touchscreen Display 17