Execute Program - Kulzer cara Print LEDcure Instrucciones De Uso

The last selected / executed program is inversely placed at the top of the list. You are able scroll through the
max. 30 programs using the 'up' (right) and 'down' (left) arrow buttons. The first programs (number at the time
of printing of these instructions) are established by Kulzer and have corresponding material names. Customer-
specific programs are able to be programd individually (see section 8.2) and a sequential number is applied
to the program name (user program 10; user program 11, etc.).
When a new unit is delivered, no parameters are stored in the customer programs.
Example program selection images:
GB
-11-
The program options are distinguished by the icon above the middle button as follows:
Kulzer programs (non-editable):
Coded customer programs:
Empty customer programs:
Kulzer programs are able to be initiated immediately. The parameters are established for the respective material.
Coded customer programs are able to be either executed or edited. They already contain parameters which
are indicated by the abbreviations in the parameter line above the program name:
a) LED power in % b) Temperature and c) Program duration
Empty customer programs must first be edited before executed.

8.2 Execute program

The program is selected by pressing the button (Enter/Middle) quickly. The 'EDIT' mode is activated for customer-
specific programs by pressing on the middle button for a longer (> 1.5 s) period of time (beep tone; Edit description
see section 8.3). If a customer-specific program is empty, only the EDIT icon appears and the function can be
activated by quickly pressing the (middle) button.
After selecting the program, the Start screen appears with the program parameters (time, temperature and LED power):
If the temperature is still too high when initiating the program, the following notification screen appears as a hint: