After the program has run successfully, the end screen appears:
Press the 'Enter' button (middle) to exit this screen. The End screen remains on the display until a button is
touched to confirm or the door is opened. Afterwards, the program returns to the Start screen of the previously
selected program.
8.3 Coding customer-specific programs
If a customer-specific program is empty, only the EDIT icon
by quickly pressing the (middle) button. If customer-specific parameters are already stored, the
displayed. The program is able to be selected with a quick-press or, alternatively, edited with a long-press >
1.5 seconds:
If you have inadvertently entered into the Edit function, press the 'ESC' button to return to program selection.
If you want to delete the customer program parameters, a confirmation prompt appears after pressing the
'DEL' button (right):
Only after confirming by pressing the 'YES' button are the program parameters permanently deleted and the
display returns to program selection. Press the 'NO' button to stay in the editor screen.
Pressing the 'Enter' button (middle) will toggle between the individual program parameters to modify them.
Run sequence:
1.
Power: Select 10 % – 100 % in single % increments. Set the parameter using the 'up' (right) and
'down' (left) buttons. Press the 'Enter' button (middle) to confirm.
2.
Temperature: Select 'no temperature' (' -°C') or between 30 – 80°C (86 – 175°F). Set the parameter
using the 'up' (right) and 'down' (left) buttons. Press the 'Enter' button (middle) to confirm.
appears and the function can be activated
GB
-13-
icon is