Operation; Turning On/Off; Control Keys; Phase Display - Bosch ACS 500 Instrucciones E Manejo

 en
5.

Operation

.1

Turning on/off

The voltage supply is provided by the lighting
mains. The ACS 500 is approved exclusively
for 230 V, 50/60 Hz. Observe the appropriate
specifications on the rating plate on the rear
of the ACS 500.
The central master switch on the rear of the
unit (Fig. 2; 3) is used to turn the ACS 500
on or off.
.

Control keys

Keys
or
V
(3 sec.)
LED Description
No response to key press.
Functions or menus can be selected by
pressing a key. The current function is in
progress.
1 689 979 953 (2006-10-19)
Description
Select menus and set parameters.
Call up menus and go to next pro-
gram step.
Return to previous program step.
Cancel running function.
.

Phase display

Symbol Description
R 134a
Recovery/recycling phase
V
Vacuum phase
Oil injection phase
UV injection phase
R 134a
Filling phase
LED Description
Phase inactive
Phase active
Phase completed
.

Input keys

The alphanumeric input keys can be used to
enter figures, letters and special characters in
input fields. In an input field, pressing a key
several times in succession displays all the
characters it can be used for (figures, upper
and lower case letters, special characters).
The C key deletes all characters entered.
Pressing E or V stores the entry.
.

Canceling during operation

Pressing the key for longer than three se-
conds cancels all functions that are running
on the ACS 500 and returns you to the main
menu.
ACS 500
Robert Bosch GmbH