Resetting The Maintenance Counter; Spare And Wearing Parts - Bosch ACS 500 Instrucciones E Manejo

 en
..7. Maintenance
.

Resetting the maintenance counter

After the oil for the vacuum pump or the filter
and drier cartridge has been replaced, the
maintenance counter must be reset.
Procedure:
1.
Connect the ACS 500 to the lighting
mains.
2.
Turn on ACS 500 at the master switch.
3.
Select the "Maintenance" option in the
main menu.
4.
Press the V key.
5.
Select the "Reset filter" and/or "Reset
vacuum pump" option.
6.
Reset the maintenance counter with
"YES".
i
The current status of the maintenance coun-
ter is displayed in the "Next maintenance"
option.
1 689 979 953 (2006-10-19)
.

Spare and wearing parts

Designation
Filter and drier cartridge
Printer
Printer connecting cable
Recording paper for printer
(5 rolls)
High pressure hose line
Low pressure hose line
High pressure quick release
coupling
(<)
Low pressure quick release
coupling
(<)
Fresh oil reservoir, UV con-
trast medium reservoir
Used oil reservoir
(<)
Connecting kit for external re-
frigerant cylinder
(<)
Seal for connecting kit
Contrast medium
(6 cartridges)
(<)
UV lamp
Injection pistol
(<)
Temperature sensor
Leak detector
UV contrast medium
Lubricating oil for vacuum
pump (500 ml)
Wearing part
(<)
ACS 500
Order number
1 687 012 168
(<)
1 687 023 361
1 684 449 066
1 681 420 028
1 680 712 235
(<)
1 680 712 236
(<)
1 686 490 967
1 686 490 968
1 685 410 094
(<)
1 685 410 095
1 687 010 148
1 680 282 012
(<)
1 689 916 001
1 687 550 014
1 687 020 412
1 687 230 062
1 687 234 012
1 689 916 000
1 682 777 021
Robert Bosch GmbH