Cleaning & maintenance
It is important to keep your Felaqua Connect clean to ensure
it functions reliably.
Do NOT submerge the main unit into water or place it
under a running tap! Water ingress can cause damage
to the electronic components within the unit.
4
For best results please clean all
parts of your Felaqua Connect
at least twice a week.
3
Use a damp cloth to ensure
all surfaces of your Felaqua
Connect are clean. Do not use
abrasive cleaning products.
Please use mild detergents but no abrasive cleaners on the Felaqua Connect
and bowl. For descaling the reservoir and reservoir lid please use common
household citric acid based descaling fluids.
To remove the lid seal, run a finger under the seal and lift it off. Wash the seal
gently by hand. You will notice that one side of the seal is flat and the other
isn't. To replace, ensure the flat side is sitting flat on the lip of the lid and
that the inside edge is slotted into the groove all the way around.
15
1
Remove and empty
the reservoir and bowl.
2
The reservoir and bowl can be put
in the dishwasher or washed by
hand with hot water and soap.