Set Up Your Hub - SURE petcare Felaqua Connect iCWS Serie Manual Del Producto

Set up your Hub

Once you have successfully downloaded the Sure Petcare App, you will need to plug in
your Hub and set it up. Please follow the steps below:
1
2
3
Your Hub may receive a software update. If you see solid red lights during setup,
don't panic, your Hub is updating its software. Once complete, the Hub will reboot
and you'll see the light sequence detailed in step 3.
Sure Petcare
4
7
Plug one end of the Ethernet cable into the base
of your Hub and the other end into a spare Ethernet
port on your router.
Assemble the power supply and plug it into your
power outlet. Plug the other end of the cable into
the base of your Hub.
Your Hub's 'ears' will start alternating red and then
green. When both ears remain solid green your Hub
is ready. If the ears fail to do this sequence please
see page 9 for more information.
In order to complete the setup of your Felaqua Connect
system you will need to follow the remaining steps
App!
on the Sure Petcare App.