Fort 180 Serie 2a Instrucciones Para El Uso Y El Mantenimiento página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 81
ENGLISH
The machine is not approved to travel on public
road.
Moreover, the machine is not equipped with night-
lights and for this reason it must not be used at night-
time.
IT IS ABSOLUTELY FORBIDDEN TO TRANSPORT
PEOPLE ON THE MACHINE. THE MANUFACTURER
SHALL NOT BE HELD RESPONSIBLE FOR DAMAGES
TO PERSONS, ANIMALS OR THINGS DERIVING
FROM A USE OF THE MACHINE DIFFERENT FROM
THE ONE MENTIONED IN THIS MANUAL.
Description Fig. 1/1A
1) Engine. For its specifications please make refer-
ence to the enclosed handbook;
2) Transmission: four forward speeds and three re-
verse in the cutter unit model (Fig. 1) and three
forward speeds and three reverse in the mower
unit model (Fig. 1/A);
3) Driving wheels;
4) Rotary hoe unit;
5) Casing;
6) Spur rod;
7) Locking lever and handlebars side adjustment;
8) Levers for handlebars height adjustment;
9) Engine bonnet;
10) Accelerator lever;
11) «Motorstop» device;
The «Motorstop» device immediately stops the
engine in emergency situations when the opera-
tor does not firmly hold the handlebars.
It also does not let the engine start if it is not kept
pressed by the clutch lever, (locked on the han-
dle-grip). The «Motorstop» device is also used
to stop the engine.
12) Clutch lever. It permits to engage and disengage
speeds, PTO, reversing gear, and to lock-unlock
the differential (if present).
13) Reversing gear control lever (it permits the re-
versal of the machine movement and of the PTO).
14) Differential locking lever (only for machines
equipped with differential);
15) Clutch lever locking device. It locks the clutch
lever in the «open clutch» position (machine
«stopped»);
16) P.T.O. engaging lever;
17) Speeds selection lever;
32
DANGER
18) Clutch cable adjusting screw (the lever must al-
ways have a clearance of 3-4 mm);
19) Clip pin adjusting screw;
20) Mowing bar unit.
Front interchangeable attachments:
- Mowing bar unit;
- Grass and brushwood chopper;
- Trimmer;
- Two-disc rotary mower;
- Front rotary brush;
- Front scraper;
- Single-stage snowblower;
- Two-stage snowblower;
Rear interchangeable attachments:
- Adjustable rotary hoe;
- Adjustable furrow opener to be assembled on the
rotary hoe back;
- Adjustable furrow opener;
- Single-bottom plow;
- Rotary plow;
- Distance between centers;
- Swivel plow;
- Rotary harrow;
- Trailer with brakes;
- Trailer with driving wheels, handlebars and lights;
- Two-wheel seat with brakes;
- Flanged spraying pump;
- Tanker;
- Furrow or spray irrigation pump;
Multipurpose accessories:
- Wheels available on demand:
- 4.00x10with adjustable disc;
5.0x10 with adjustable disc;
5.00x12 with adjustable disc;
- 6,5/80x12 with adjustable disc (extension for cut-
ter unit is required):
18.00x9.50x8 with fixe disc;
- Cage wheels;
- «Margherita» wheels;
- Wheels enlargements;
- Wheels snow-chains;
- Dual wheels;
- Extension for cutter unit;
- Ballast for wheels;
- Front ballast;
- Synchronized PTO for trailer with driving wheels;
- Drum brakes unit;

Publicidad

Tabla de contenido
loading

Productos relacionados para Fort 180 Serie 2a

Tabla de contenido