Homelite HCS3335A Manual De Utilización página 31

GB GB
F F D D E E I I P P
improperly adjusted, or is not completely and
securely assembled. Be sure that the saw chain stops
moving when the throttle control trigger is released.
If the saw chain moves at idle speed, the carburettor
may need adjusting. Refer to Adjusting the Carburettor
in the Maintenance section of this manual. If the saw
chain still moves at idle speed after adjustment has
been made, contact an authorized service centre for
adjustment and discontinue use until the repair is made.
REFUELING (DO NOT SMOKE!)
To reduce the risk of fire and burn injury, handle fuel
■
with care. It is highly flammable.
Mix and store fuel in a container approved for petrol.
■
Mix fuel outdoors where there are no risks from
■
sparks or flames.
Select bare ground, stop the engine, and allow it to
■
cool before refuelling.
Loosen the fuel cap slowly to release any pressure
■
and to keep fuel from escaping around the cap.
Tighten the fuel cap securely after refuelling.
■
Wipe spilled fuel from the unit. Move 10 metres away
■
from refuelling site before starting engine.
NEVER attempt to burn off spilled fuel under any
■
circumstances.
KICKBACK
Kickback is a dangerous reaction that can lead to
■
serious injury. Do not rely only on the safety devices
provided with the saw. As a chainsaw user, you must
take special safety precautions to help keep your cutting
jobs free from accident or injury. See the General Safety
Rules and Operation sections of this manual for added
information on kickback and how to avoid serious
personal injury.
HCS3435A-25lgs manual.indd Sec1:28 HCS3435A-25lgs manual.indd Sec1:28
NL NL S S DK DK N N FIN GR HU FIN GR HU
English English
28
CZ RU CZ RU RO PL SLO HR TR EST LT RO PL SLO HR TR EST LT LV LV SK BG SK BG
12/19/08 3:08:41 PM 12/19/08 3:08:41 PM