Operation; Pre-Ride Inspection - Honda NXR150 Bros KS Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Owner´s Manual

OPERATION

Pre-ride Inspection

For your safety, it is very important to take a few
moments before each ride to walk around your
motorcycle and check its condition. If you detect any
problem, be sure you take care of it, or have it
corrected by your Honda dealer.
WARNING
!
Improperly maintaining this motorcycle or failing to
correct a problem before riding can cause a crash in
which you can be seriously hurt or killed.
Always perform a pre-ride inspection before every
ride and correct any problems.
1. Engine oil level – add engine oil if required
(page 27). Check for leaks.
2. Fuel level – fill fuel tank when necessary (page 25).
Check for leaks.
3. Front and rear brakes
(For NXR150 Bros KS/ES)
Check operation and if necessary, adjust free play
(pages 20 and 21).
(For NXR150 Bros ESD)
Check operation;
front: make sure there is no brake fluid leakage
(page 19).
rear: adjust free play if necessary (pages 21 and 22).
4. Tyres – check condition and pressure (pages 28
and 29).
5. Drive chain – check condition and slack (page 57).
Adjust and lubricate if necessary.
6. Chain guide slider and slipper – check slider wear
(page 61).
7. Throttle – check for smooth opening and full
closing in all steering positions.
8. Clutch – check operation, and adjust if necessary
(pages 23 and 24).
9. Lights and horn – check the headlight, tail light,
brake light, turn signals, indicators and horn for
proper operation.
10. Spark plug and high tension terminal – check for
looseness.
11. Engine stop switch – check for proper function
(page 33).
12. Nuts, bolts, fasteners – check the front wheel to
see that the axle nuts are tightened securely.
Check security of all other nuts, bolts, and
fasteners.
37

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Nxr150 bros esNxr150 bros esd

Tabla de contenido