Honda NXR150 Bros KS Manual Del Propietário página 102

Owner´s Manual
(B)
(A)
(4)
Other Checks
Check the brake cable for kinks or signs of wear that
could cause sticking or failure.
Lubricate the brake cable with a commercially available
cable lubricant to prevent premature wear and
corrosion.
Make sure the brake arm, spring and fasteners are in
good condition.
(3) Front brake adjusting
nut
(4) Lock nut
(A) Decrease free play
(B) Increase free play
(3)
Rear Brake
Pedal Height Adjustment
The stopper bolt (1) is provided to allow adjustment of
the pedal height. To adjust the pedal height, loosen the
lock nut (2) and turn the stopper bolt. Tighten the lock
nut.
(1)
(2)
(3)
Brake Adjustment
1. Place the motorcycle on its side stand.
2. Measure the distance the rear brake pedal (3)
moves before the brake starts to take hold.
Free play should be:
15 – 25 mm (0.6 – 1.0 in)
If adjustment is necessary, turn the rear brake
adjusting nut (4).
21
(1) Stopper bolt
(2) Lock nut
(3) Rear brake pedal