Brake Pad Wear - Honda NXR150 Bros KS Manual Del Propietário

66
Installation Notes
• Reverse the removal procedure.
• Tighten the rear axle nut to specified torque.
Rear axle nut torque:
93 N·m (9.5 kgf·m, 69 lbf·ft)
• Adjust the brake (page 21) and drive chain (page 58).
• After installing the wheel, apply the brake several
times, and check for free wheel rotation when
released.
If a torque wrench was not used for installation, see
your Honda dealer as soon as possible to verify proper
assembly. Improper assembly may lead to loss of
braking capacity.

Brake Pad Wear

(NXR150 Bros ESD)
(Refer to the Safety Precautions on page 47.)
Brake pad wear depends upon the severity of usage,
the type of riding, and road conditions. (Generally, the
pads will wear faster on wet and dirty roads.)
Inspect the pads at each regular maintenance interval
(page 48).
Front Brake
Check the wear indicator grooves (1) in each pad.
If either pad is worn to the bottom of the grooves,
replace both pads as a set. See your Honda dealer for
this service.
FRONT BRAKE
(1)
(1)
Owner´s Manual
(1) Wear indicator grooves