Drive Chain Slider; Front And Rear Suspension Inspection - Honda NXR150 Bros KS Manual Del Propietário

Owner´s Manual

Drive Chain Slider

(Refer to the Safety Precautions on page 47.)
Check the chain slider (1) for wear.
When the thickness of the chain slider reaches the
limit, the chain slider must be replaced. For
replacement, see your Honda dealer.
(1)
(1)
(1) Chain slider

Front and Rear Suspension Inspection

(Refer to the Safety Precautions on page 47.
1. Check the fork assembly by locking the front brake
and pumping the fork up and down vigorously.
Suspension action should be smooth and there
must be no oil leakage.
2. Swingarm bearings should be checked by pushing
hard against the side of the rear wheel while the
motorcycle is on a support block. Free play
indicates worn bearings.
3. Carefully inspect all front and rear suspension
fasteners for tightness.
61
)