Starting The Engine - Honda NXR150 Bros KS Manual Del Propietário

38

Starting the Engine

Always follow the proper starting procedure described
below.
(NXR150 Bros KS)
This motorcycle can be kickstarted with the
transmission in gear by disengaging the clutch before
operating the kickstarter.
(NXR150 Bros ES/ESD)
This motorcycle can be started with the transmission
in gear by disengaging the clutch before operating the
electric starter.
Your motorcycle's exhaust contains poisonous carbon
monoxide gas. High levels of carbon monoxide can
collect rapidly in enclosed areas such as a garage.
Do not run the engine with the garage door closed.
Even with the door open, run the engine only long
enough to move your motorcycle out of the garage.
(NXR150 Bros KS)
Do not operate the kickstarter pedal while the engine
is running as engine damage could result. Do not apply
excessive force on the kickstarter.
Fold up the kickstarter after the kickstarter is returned
to the pedal stop.
(NXR150 Bros ES/ESD)
Do not use the electric starter for more than
5 seconds at a time. Release the start button for
approximately 10 seconds before pressing it again.
Preparation
Before starting, insert the key, turn the ignition switch
to ON and confirm the following:
• The transmission is in NEUTRAL (neutral indicator
light ON).
• The engine stop switch is at
• The fuel valve is ON.
Owner´s Manual
(RUN).