Owner´s Manual
Starting Procedure
(NXR150 Bros ES/ESD)
Cold Engine
1. Pull the choke lever (1) up all the way to Fully ON
(A).
(1)
(A)
(B)
(C)
2. With the throttle slightly open, press the start
button.
3. Immediately after the engine starts, push the choke
lever down to the Halfway position (B).
4. Warm up the engine by opening and closing the
throttle slightly.
(1) Choke lever
(A) Fully ON
(B) Halfway position
(C) Fully OFF
5. Continue warming up the engine until it runs
smoothly and responds to the throttle, when the
choke lever is at Fully OFF (C).
Warm Engine
1. Do not use the choke.
2. Start the engine following step 2 under "Cold
Engine."
NOTICE
Extended use of the choke may impair piston and
cylinder wall lubrication and damage the engine.
39