Braking - Honda NXR150 Bros KS Manual Del Propietário

44

Braking

(NXR150 Bros KS/ES)
Your motorcycle is equipped with mechanically-
activated drum brakes. Operating the brake lever
applies the front drum brake. Depressing the brake
pedal applies the rear drum brake.
(NXR150 Bros ESD)
Your motorcycle is equipped with a hydraulically-
activated disc brake in front and a mechanically-
activated drum brake at the rear. Operating the brake
lever applies the front disc brake. Depressing the
brake pedal applies the rear drum brake.
For normal braking, apply both the brake pedal and lever
while downshifting to match your road speed. For
maximum braking, close the throttle and firmly apply the
pedal and lever; pull in the clutch lever before coming to
a complete stop to prevent stalling the engine.
Important Safety Reminders
• Independent operation of only the brake lever or
brake pedal reduces stopping performance.
• Extreme application of the brake controls may cause
wheel lock, reducing control of the motorcycle.
• When possible, reduce speed or brake before
entering a turn; closing the throttle or braking in
mid-turn may cause wheel slip. Wheel slip will
reduce control of the motorcycle.
• When riding in wet or rainy conditions, or on loose
surfaces, the ability to maneuver and stop will be
reduced. All of your actions should be smooth under
these conditions. Rapid acceleration, braking or
turning may cause loss of control. For your safety,
exercise extreme caution when braking, accelerating
or turning.
• When descending a long, steep grade, use engine
compression braking by downshifting, with intermittent
use of both brakes. Continuous brake application can
overheat the brakes and reduce their effectiveness.
• Riding with your foot resting on the brake pedal or
your hand on the brake lever may actuate the brake
light, giving a false indication to other drivers.
It may also overheat the brakes, reducing
effectiveness.
Owner´s Manual