Removing Forward (A) Gear Ass'y; Disassembly Of Forward Gear (A) Gear - TOHATSU EverRun MX50D2 Manual De Servicio

Lower Unit
1
4
6-60
All manuals and user guides at all-guides.com

24) Removing Forward (A) Gear Ass'y

1.
2
25) Disassembly of Forward Gear (A)
1
1.
3
Take out bearing 1 and forward (A) gear 2 by using a
hand put in the gear case.
· Put mid finger into forward (A) gear hole and
take it between the finger and the first finger
(thumb), and lift the thumb side of the gear to
remove it.
· Take forward (A) gear out taking care not to hit
pinion (B) gear.
· For MWX50 models: Can not remove forward
(A) gear when removed pinion (B) gear.
Refer to P6-52, remove pinion (B) gear, and
then remove forward (A) gear.
Gear
Remove taper roller bearing 1.
Use two bladed screw drivers to remove taper roller
bearing from forward gear (A) gear.
Put the drivers into grooves of forward (A) gear, and pry
out taking care not to damage the shim.
CAUTION
Be careful not to damage shim 3.
GB
2st 50D2 2011