Publicidad
Bracket
7-28
All manuals and user guides at all-guides.com
6) Disassembly of Drive Shaft Housing
1.
Remove bolts that secure engine base to drive shaft
housing.
2.
Tap lightly with a plastic hammer to separate engine base
from the housing if it is seized.
Remove M6 installation bolt located in the area
shown by the arrow.
If necessary, use a bladed screw driver to pry the
engine base taking care not to scratch mating
surface.
GB
2st X50D2 2011
Publicidad
Capítulos
Solución de problemas
