Specialized COMO Manual De Instrucciones página 15

7. 5 . F R O N T RAC KS M OUN T
An optional front rack can be fitted to the bicycle via mounts behind the faceplate on the head
tube.
7.3
Fig. 7.3
Insert a 2.5 mm hex key into the screw hole (A) on the faceplate and loosen the bolt hidden
„
in the head tube (B), then remove the faceplate.
The faceplate covers 4 threaded bores (C) which are used to mount the front rack. See the
„
rack user manual for the proper installation procedure.
WARNING: The maximum allowed cargo weight is 27 kg for the rear rack and
15 kg for the front rack. In addition, make sure to not exceed the structural
weight limit of the bicycle as stated in the Owner's Manual.
WARNING! Racks and baskets, especially when loaded, will affect the
handling of your bicycle by altering the center of gravity, weight, and balance.
Before your first ride, you should practice riding in a controlled environment.
13
WARNING! The optional front rack is attached to the front end of your
bicycle, and as a result, a proper and secure installation by your Authorized
Specialized Retailer is critical for your safety. Only use original hardware
at all times. Improper installation or adjustment may result in an accident,
which can cause serious personal injury.
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on
your bicycle is important. If too little force is applied, the fastener may not
hold securely. If too much force is applied, and the fastener can strip threads,
stretch, deform or break. Either way, an incorrect tightening force can result
in component failure, which can cause you to lose control and fall. Where
indicated, ensure that each bolt is torqued to specification. After your first
ride, and consistently thereafter, recheck the tightness of each bolt to ensure
secure attachment.
7.6. RAC K AC CESSO RY MOUNTS
7.4
Fig. 7.4
The rear rack is fitted with adjustable stoppers, these stoppers allow the use of a variety of
„
pannier bags and it stops the bag from sliding on the rail.