Specialized COMO Manual De Instrucciones página 18

8. SYSTE M INTE RFACE
INFO: The functionality of the system interface as summarized in this manual
is current as of the date this manual was written and is subject to change.
Specialized reserves the right to change the functionality at any time and
without notice, including modifying, reducing, and/or adding features.
WARNING! Use caution when viewing or using the display while riding, as it
can be distracting and can lead to accidents. You should always stop before
changing settings or operating the various functions of the display. Do not
attempt to customize the pages or perform setup adjustments while riding.
8 .1. M AST E R MI N D TCD - w (D ISPLAY)
8.1
Fig. 8.1
All Como models are equipped with the MasterMind TCD-w display. The display turns on the
system and provides information on the display.
The MasterMind TCD-w is used to power the bike and on and off (A).
„
The USB-C port on the right side of the display (B) is for Specialized retailers and service
„
centers. Make sure the rubber port seal is firmly in place when the bicycle is in use.
The USB-C port can be used to charge your phone and other accessories with up to 1A current.
„
Do not expose the display to intense heat or sunlight for a prolonged period. This can
„
damage the display and/or battery.
Only use a damp or dry soft cloth to clean the display. Do not use harsh cleaning products.
„
Do not disassemble or drop the display.
„
Make sure the display and mount are firmly installed on the handlebar before riding.
„
8 .2. START IN G T HE SYST EM ON T HE MAST ER MI ND TCD - w
8.2
Fig. 8.2
To start the system, press and hold the POWER button located on the display until the
„
display turns on.
To power off the system, press the POWER button again.
„
16