Specialized COMO Manual De Instrucciones página 44

1 2 .4. E N V I O LO AUTO MAT I Q I G H C AL IBRATI ON
On the first setup or after system maintenance or incorrect functionality the system has to
be calibrated. The first setup calibration should be completed by your Authorized Specialized
Retailer before handing over the bicycle. If this was not done, instructions will automatically
be displayed on the MasterMind TCD-w before you can ride the bike for the first time. Simply
follow the on-screen guide to calibrate the bicycle yourself.
CAUTION: After system maintenance or incorrect functionality the system has to
be re-calibrated.
12.14
Fig. 12.14
You can re-calibrate your bicycle at any stage by selecting enviolo calibration in the settings.
Dual Press the (+)(-) button on the remote to access the settings menu.
„
Using (+)(-) buttons, select OPTION on the menu, press F1 to select.
„
Using (+)(-) buttons, select ENVIOLO CAL on the menu, press F1 to select.
„
Follow the on-screen Guide.
„
1 3 . RE GULATORY STAT E M E NTS
RoHS:
Specialized Bicycle Components, Inc. Certifies that this product and its packaging are in
compliance with European Union Directive 2011/65/EU on the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronics Equipment, commonly known as
RoHS.
FCC Statement:
This device complies with Part 15 of the FCC Rules.
Caution: If any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received, including interference
that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user's authority to
operate the equipment.
The RF Exposure Compliance distance is 20 millimeters.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
42