Specialized COMO Manual De Instrucciones página 37

DROPOUT COUPLER BOLTS*
BATTERY LATCH BOLT
BATTERY (SEAL) MOUNTING BOLTS
SPEED SENSOR MOUNTING BOLT
SPEED SENSOR MAGNET BOLTS (6 BOLT
VERSION)*
SPEED SENSOR MAGNET (CENTERLOCK
VERSION)*
REMOTE SET SCREW
CHAIN GUARD MOUNT BOLT (@MOTOR/
CHAINSTAY)
CHAIN GUARD BOLTS
KICKSTAND BOLTS
FRONT FENDER MOUNT BOLTS
REAR FENDER MOUNT BOLTS
REAR RACK BOLTS @DROPOUT
HEADTUBE RACK MOUNT FACEPLATE
SCREW
MASTERMIND TCD-W TWIST MOUNT
MASTERMIND TCD-W BASE PLATE MOUNT
MASTERMIND TCD-W SECURITY SCREW
* Not all models are equipped with all the above components.
** enviolo equipped models only
35
TX25 4 35
3 mm Hex 3 26.5
TX20 3.3 29
3 mm Hex 1
TX25 6.2 55
CASSETTE LOCK
40 354
RING TOOL
2 mm Hex 0.8
3 mm Hex 4.5 40
3 mm Hex 3 2.65
5 mm Hex 10 89
4 mm Hex 4 35
4 mm Hex 4 35
5 mm Hex 9 80
2.5 mm Hex 1 8.8
3 mm Hex N/A N/A
3 mm Hex 1 8.8
PHILIPS HEAD
N/A N/A
SCREWDRIVER
INFO: For all non-Specialized components, please refer to the manufacturer's
manuals for tools and torque settings.
11.4. CU STO MIZATIO N
The Como bicycle is tested and approved as a Pedelec with its original specifications only.
9
WARNING! Como bicycles are supplied with a suspension fork which was
selected, tuned, and approved for the frame. The use of different aftermarket
forks (less or more travel or a different style of fork), much like is the
case with any aftermarket parts, may negatively impact geometry and/
or ride quality, and, in some circumstances, may result in a catastrophic
failure of the frame or its components. Please check with your Authorized
7
Specialized Retailer or suspension manufacturer regarding aftermarket fork
compatibility.
CAUTION: Certain chain rings may not have adequate clearance with the
chainstay. Verify spacing and chain line before using it.
11.5. RECO MMENDED T IRE PRESSURES
Proper tire pressure is critical for optimal performance. Tires with higher pressure will typically roll
faster and provide less rolling resistance, but provide less traction. Tires with lower pressure will
typically provide increased traction and control at the expense of rolling resistance.
Use a quality pressure gauge and refer to the tire pressure recommendations written on the
side of the tires.
TECH TIP: Because of the extra weight of the Como, as a rule of thumb, tire
pressure should generally be higher compared to a regular bicycle.