Specialized COMO Manual De Instrucciones página 28

9.4
Fig. 9.4
When the app prompts you confirm the six-digit pairing code. The code will be displayed
„
on the MasterMind TCD-w screen. Follow the instructions displayed on the MasterMind
TCD-w and in-app messages to complete the connection.
Once connected, the bike serial number will appear in green at the bottom of the screen,
„
with the connection status being displayed in green as "connected".
INFO: The pairing with your bike only needs to be established once via the
Mission Control App, unless you clear your device Bluetooth history.
9. 5 . C U STO MI ZI N G T H E MASTE RM IND TCD -w D I SPLAY
The MasterMind TCD-w is shipped with multiple standard screen configurations. With Mission
Control you can add more screens, customize the layouts, rename them, and change the stats
displayed.
INFO: For more information go to
missioncontrol
=
https://support.specialized.com/home/
1 0. BAT TE RY AN D C H ARG E R
As previously mentioned, your bicycle includes a powerful high-performance Lithium-Ion
battery integrated into the bicycle frame. The battery of the Como is removable from the
frame. Be mindful of the energy stored in your battery and make sure you read and follow the
below instructions regarding handling, charging, storing, and cleaning. Not following these
instructions may have serious consequences and can result in a fire, which may seriously
injure you and/or other people.
10.1. INSTRUCTIONS PERTAINING TO THE RISK OF FIRE OR ELECTRIC SHOCK
Only use the type of battery that is specifically designed for and approved by Specialized for use
„
with your bicycle. The same applies to the charger, charger cord, and output cable. Only use
charger components that are approved by Specialized to work with your battery.
Never use or charge a battery with external damage, such as a cracked or chipped enclosure, or if it
„
is leaking any battery fluid. The same applies to your charger, charger cord, and output cable. If your
charger has any external damage, do not use it. If the charger cord or output cable show signs of
fraying or have damaged insulation, do not use them.
Be sure your battery is securely installed and locked into place before riding your bicycle. Be careful not
„
to drop the battery when removed from the bicycle. A hard enough impact can potentially damage the
battery which may or may not be visible from the outside but can render the battery unsafe.
Water inside a battery or charger can cause a short circuit and fire. Do not pressure-wash your
„
battery or charger. Do not submerge them in water or leave them out in the rain or snow. Chargers
are designed for indoor use only. When you connect the charger to the battery, make sure the
connections are dry and clean.
Always be present when charging your battery and disconnect the charger from the battery when
„
it is fully charged. Do not leave your battery plugged in or let it charge overnight. Immediately
disconnect the battery from the charger when you encounter a problem during the charging
process, e.g., if the charger or battery get abnormally hot (e.g., hot to the touch) or if the LED lights
or display(s) signal a problem.
The battery may get warm during the charging process. When charging the battery outside of
„
the bicycle frame, place it on a level stable surface unaffected by heat and allow for sufficient
ventilation. The same applies to the charger. Do not place the battery or the charger on a rug or
carpet or cover them during the charging process as it may cause a fire. If your battery stays warm
for a long period after charging, it may be damaged.
26