Specialized COMO Manual De Instrucciones página 21

ENVIOLO AUTOMATiQ IGH:
Long-pressing the F2 button on the remote will switch to Micro Tune mode.
„
Use the (+) (-) buttons to increase or decrease the value.
„
To switch out of Micro Tune and back to standard modes, long-press the F2 button.
INFO: Connect your bicycle to Mission Control to see more about tuning your
bicycle.
8 . 6 . PEDAL PAC E BA R O N TH E M A STE R MI N D TCD - w
8.7
RPM
RPM
RPM
RPM
RPM
RPM
Fig. 8.7
Certain pages of MasterMind TCD-w show the interactive pedal pace bar. The bar shows
„
your current pedal pace and guides you to the optimal pedal pace.
When your pedal pace decreases, the icon on the cadence bar moves to the left and turns from
„
green (ideal) to orange (low) to red (too low). When the pedal pace gets too high, the icon on the
bar shifts to the right and turns from green (ideal) to orange (high) to red (too high).
For best motor support, efficiency, and range, you should keep your pedal pace in the
„
green section of the pedal pace bar.
19
PEDAL PACE
(rpm)
+120
100 - 120
70 -100
40-70
-40
0
8.7. C HA NGI NG GEA R RATIO ON TH E ENVIO LO MANUAL HU B
8.8
Fig. 8.8
Certain Como models are equipped with the enviolo manual hub. Changing the gear ratio on
the hub is done via the shifter on the right side of the handlebar.
Rotate the controller grip clockwise to shift into low ratios for starting or climbing.
„
Rotate the controller grip counterclockwise to shift into high ratios for higher speeds.
„
INFO: For more information on the enviolo manual shifting setup, please refer
to the manufacturer's manual.
The component image shown above (Fig. 8.8) is current as of the date
this manual was written and is subject to change. Specialized reserves the
right to change the components at any time and without notice, including
modifying, reducing, and/or adding features.