Publicidad
Idiomas disponibles
Idiomas disponibles
Table 4-2
Setup menu item descriptions (continued)
Legend
Keysight U1241C/U1242C User's Guide
Available settings
0001 to 19999 seconds
[a]
tYPE K, tYPE J
, or tYPE mV
°C/°F, °C, °F/°C, or °F
4267 Hz, 4151 Hz, 4042 Hz,
3938 Hz, 3840 Hz, 3746 Hz,
3675 Hz, 3572 Hz, 3491 Hz,
3413 Hz, 3339 Hz, 3268 Hz,
3200 Hz, or oFF
bEEE, MELo, or oFF
SHor, oPEn, or tonE
bE.rL, bE.--, --.rL, or --.--
Pri or SEC
YES or no
Description
Set the logging duration for interval logs from 1 to
19999 seconds.
Default is 1 second (0001).
Set the multimeter's thermocouple type (type J or
type K) or mV measurement for the T1 input.
Default is tYPE K.
Set the multimeter's temperature unit
(Celsius/Fahrenheit, Celsius, Fahrenheit/Celsius,
or Fahrenheit).
Default is °C (Celsius).
Set the multimeter's beep frequency from
3200 Hz to 4267 Hz. You can also disable this
feature (oFF).
Default is 3840 Hz.
Set the multimeter's startup sound to melody
(MELo) or beep (bEEE). You can also disable this
feature (oFF).
Default is beep (bEEE).
Set the multimeter's continuity type to short
(SHor), open (oPEn), or tone (tonE).
Default is short (SHor).
Set the multimeter's alert type to beeper (bE.--),
flashing red LED (--.rL), both at once (bE.rL), or
none (--.--).
Default is both at once (bE.rL).
Change the battery selection from primary (Pri) to
secondary (SEC).
Default is primary (Pri).
Reset the multimeter to its factory default
settings.
Default is (no).
Multimeter Setup Options
Learn more on:
page
page
page
page
page
page
page
page
page
4
125
126
128
129
130
131
132
133
135
117
Publicidad
