Publicidad
Idiomas disponibles
Idiomas disponibles
4
Multimeter Setup Options
Changing the temperature unit
This setup item is locked for certain regions. Always set the temperature unit
CAUTION
display per the official requirements and in compliance with the National
laws of your region.
Press
This setting is used with temperature measurements (see page 79). Four
combinations of displayed temperature unit(s) are available:
– Celsius only: Temperature measured in °C.
– Fahrenheit/Celsius: During temperature measurements, press
– Celsius/Fahrenheit: During temperature measurements, press
– Fahrenheit only: Temperature measured in °F.
Parameter
Unit
To change the temperature unit:
1 Press and hold
2 Press
NOTE
Press
128
Log
for > 1 second to unlock this setting.
Hold
> 1 second to switch between °F and °C.
> 1 second to switch between °C and °F.
Range
°C, °F/°C, °C/°F, or °F
View
Shift
Esc
access the Setup menu.
MaxMin
or
Hz
Log
for > 1 second to unlock this setting.
Hold
while turning the rotary switch (from OFF to on) to
Auto
until
is shown on the secondary display.
Range
Keysight U1241C/U1242C User's Guide
Auto
for
Range
Auto
for
Range
Defaul t setting
°C
Publicidad
