Publicidad
Idiomas disponibles
Idiomas disponibles
3 Press
4 Press
5 Press and hold
Setting the input impedance
This setting is used with mV measurements. You can manually set the impedance
for a 10 MΩ or >1 GΩ reading.
Parameter
inPU mV
To change the input impedance:
1 Press and hold
2 Press
Figure 4-19
Keysight U1241C/U1242C User's Guide
Vsense
or
Log
to save your changes or
Hold
View
Shift
Esc
operation.
Range
10 MΩ or 1000 MΩ
View
Shift
Esc
access the Setup menu.
MaxMin
or
Hz
inPU mV display
to set the data refresh rate.
until the multimeter restarts to return to normal
while turning the rotary switch (from OFF to on) to
Auto
until
Range
Multimeter Setup Options
View
to discard your changes.
Shift
Esc
Defaul t setting
10 MΩ
is shown on the secondary display.
4
137
Publicidad
