Publicidad
Idiomas disponibles
Idiomas disponibles
4
Multimeter Setup Options
5 Press and hold
Enabling smooth mode
Smooth is used to smoothen the refresh rate of the readings in order to reduce the
impact of unexpected noise and to help you achieve a stable reading.
The smooth time is defined as the set value +1. Smooth will be restarted when the
variation count is exceeded, when the range is changed, or after a multimeter
function or feature is enabled. The variation count is set to the value used for the
AutoHold feature (see "Changing the variation count" on page 119). You can
permanently enable or disable Smooth from the Setup menu.
Parameter
tiME
To enable Smooth:
1 Press and hold
2 Press
Figure 4-2
120
View
Shift
Esc
operation.
Range
(001.d to 1999.d) or (001.E to 1999.E)
View
Shift
Esc
access the Setup menu.
MaxMin
or
Range
Hz
the
icon appears to the left of the primary display.
tiME display - Smooth
until the multimeter restarts to return to normal
while turning the rotary switch (from OFF to on) to
Auto
until
is shown on the secondary display and
Keysight U1241C/U1242C User's Guide
Defaul t setting
009.d (disabled)
Publicidad
