Publicidad
Idiomas disponibles
Idiomas disponibles
4
Multimeter Setup Options
Figure 4-9
3 Press
4 Press
5 Press and hold
Changing the thermocouple type or setting the mV measurement
This setting is used with temperature measurements (see page 79) or for
performing mV measurements (see page 59). Select a thermocouple type that
matches the thermocouple sensor you are using for temperature measurements,
or set the mV measurement function for the T1 input.
Parameter
CoUP
[a] U1242C only.
To change the thermocouple type or to set the mV measurement function:
1 Press and hold
126
tiME display - data logging
Vsense
or
duration.
Log
to save your changes or
Hold
View
Shift
Esc
operation.
Range
tYPE K, tYPE J
View
Shift
Esc
access the Setup menu.
Auto
MaxMin
and
or
Range
Hz
Esc
until the multimeter restarts to return to normal
[a]
, or tYPE mV
while turning the rotary switch (from OFF to on) to
Keysight U1241C/U1242C User's Guide
to set the sample interval
View
to discard your changes.
Shift
Defaul t setting
tYPE K
Publicidad
