Publicidad
Idiomas disponibles
Idiomas disponibles
2
Making Measurements
Figure 2-20
To measure temperature for T2 (U1242C only), connect the probe to the
Press
(you must first change the temperature unit to switch between °C and °F or °F and
°C). Refer to "Changing the temperature unit" on page 128.
The option to change the temperature unit is locked for certain regions.
CAUTION
Always set the temperature unit display per the official requirements and in
compliance with the National laws of your region.
– Shorting the
NOTE
– To change the default thermocouple type from type-K to type-J
[a] U1242C only.
80
T1 temperature display
2
input terminal.
Auto
for > 1 second to change the temperature units between °C or °F
Range
terminal to the
1
terminal will display the temperature T1 or T2 at the multimeter's
A
terminals respectively.
"Changing the thermocouple type or setting the mV measurement" on
page 126.
terminal, or the
COM
Keysight U1241C/U1242C User's Guide
terminal to the
mA
[a]
, see
Publicidad
