Publicidad
Idiomas disponibles
Idiomas disponibles
3 Press
4 Press
5 Press and hold
Changing the auto power off (APO), backlight, and flashlight timeouts
The multimeter's automatic power off (see page 26), backlight (see page 27), and
flashlight features use timers to determine when to turn off the backlight and
flashlight, and when to automatically turn the multimeter off. You can enable or
disable these features from the Setup menu.
Parameter
AoFF
bLit
tLit
To change the APO, backlight, or flashlight timeout period:
1 Press and hold
2 Press
Keysight U1241C/U1242C User's Guide
Vsense
or
To permanently enable Smooth, change the last digit shown from d (disabled)
to E (enabled).
Log
to save your changes or
Hold
View
Shift
Esc
operation.
Range
(01.d to 99.d) or (01.E to 99.E) minutes
(01.d to 99.d) or (01.E to 99.E) seconds
(01.d to 99.d) or (01.E to 99.E) seconds
View
Shift
Esc
access the Setup menu.
MaxMin
or
Hz
secondary display.
MaxMin
and
or
Hz
until the multimeter restarts to return to normal
while turning the rotary switch (from OFF to on) to
Auto
until
,
Range
Multimeter Setup Options
Auto
to set the Smooth refresh rate.
Range
View
to discard your changes.
Shift
Esc
Defaul t setting
(15.E) - 15 minutes, enabled
(15.E) - 15 seconds, enabled
(15.E) - 15 seconds, enabled
, or
is shown on the
4
121
Publicidad
