Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 4-20
3 Press
4 Press
5 Press and hold
Changing the % scale range
This setting is used with % scale current measurements (see page 91). The
multimeter converts DC current measurements to a percentage scale readout of
0% to 100% based on the selected range in this menu. For example, a 25%
readout represents a DC current of 8 mA on the 4-20 mA % scale, or a DC current
of 5 mA on the 0-20 mA % scale.
Parameter
PErC
To change the % scale range:
1 Press and hold
2 Press
Keysight U1241C/U1242C User's Guide
LPF display - DC
Vsense
or
Log
to save your changes or
Hold
View
Shift
Esc
operation.
Range
4-20 mA, 0-20 mA, or oFF
View
Shift
Esc
access the Setup menu.
MaxMin
or
Hz
to enable or disable the filter.
until the multimeter restarts to return to normal
while turning the rotary switch (from OFF to on) to
Auto
until
Range
Multimeter Setup Options
View
to discard your changes.
Shift
Esc
Defaul t setting
4-20 mA
is shown on the secondary display.
4
139
Publicidad
