Frigomat TITAN 1 Manual De Uso Y Mantenimiento página 56

Fig.1
Fig.2
Fig.3
21 - ENGLISH
6.3.4 COFFEE SLUSH
- With the machine at STOP, press the STOP and
AUTOMATICO (AUTOMATIC) keys at the same
time to access
with time control and cyclical mixing (Fig. 1).
- The SLUSH LED switches on to signal that one
has accessed the SLUSH mode.
- The LEDs of the UP (▲),Conferma (Confirm)
(◄►) and DOWN (▼) keys light up and the
numbers relative to the time setting to be
configured, expressed in minutes and between 1'
and 10', appear on the display (Fig. 2). Press the
UP (▲) and DOWN (▼) keys to increase or
decrease the value. High processing times
correspond to higher consistencies, low times
correspond to lower consistencies
The maximum programmable time value is equal
to 10 minutes but not all mixtures and not all
quantities can reach such a high consistency
value.
For low amounts of mixture do not select time in
excess of 3-5 minutes.
- Subsequently, press the Conferma (Confirm)
(◄►) key to start a new slush production cycle
(Fig. 3).
- During the production cycle, the compressor
always keeps running, whilst the beater will
operate in cyclic
incorporation of air in the mixture.
- After the programmed time has elapsed, the
compressor stops and an intermittent acoustic
signal warns the operator that it is possible to
extract the product.
The COFFEE
envisage the automatic preservation of the
product at the end of the production cycle.
the slush production program
mode to reduce
SLUSH program
the
does not