Frigomat PEB 30 Manual De Uso Y Mantenimiento página 59

- Chemical sanitising products must be used in compliance with standards in force and
with the utmost caution.
- During sanitising operations, do not touch parts with tissues, sponges, rags or any
other non-sterile material.
RINSING AND DRYING
• Wash your hands well and wear disposable latex
gloves.
• Remove from the sanitising tank all the components
which were previously disassembled, brushed and
emerged.
• Rinse them with plenty of cold drinking water, making
sure to remove all possible leftover sanitizer.
• Place the rinsed components on a clean table and let
them dry in the air.
DO NOT use rags, sponges or anything else to dry the
components. Make sure no dust or other impurities
come into contact with the sanitised surfaces while
they are drying.
• Use the flexible shower head supplied with the
machine to rinse the fixed parts of the machine which
were treated with the sanitizer (tank, drain duct, etc.).
• When all the components are dry, put them back onto
the machine making sure the gaskets are in good
conditions.
ENGLISH - 26