Publicidad
Idiomas disponibles
Idiomas disponibles
This procedure is used to set a temperature
threshold at which a buzzer is triggered.
Proceed as follows.
1 - Press the key (C) and the display (A) will show
the cooking temperature.
2 - Press the keys (H-L) to increase or decrease
the values shown on the display.
3 - Wait about 4 seconds for the new value set to
be saved.
Press the keys (H-L) together and the display
will show the water temperature in the cooking
well.
Manual cooking
Proceed as follows.
1 - Press the key (D).
The last value set appears on the display (A).
2 - Press the keys (H-L) to increase or decrease
the values shown on the display.
The cooking time increases or decreases by 30
IT
IT
seconds each time one of the keys (H-L) is
pressed.
GB
GB
3 - Press the key (D) again to start the cooking cy-
cle.
DE
DE
Programmed cooking
Proceed as follows.
FR
4 - Keep pressing the key (E) until the display (A)
FR
shows the cooking time required (up to 5 preset
cooking times can be recalled).
ES
ES
5 - Press key (D) to start the cooking cycle.
Modify program
Proceed as follows.
6 - Press the key (E) until the display (A) shows the
cooking time you wish to modify.
7 - Press the keys (H-L) to increase or decrease
the values shown on the display.
The cooking time increases or decreases by 30
seconds each time one of the keys (H-L) is
pressed.
English
COOKING TEMPERATURE SETTING
TIME SETTING
A
C
Important
During the cooking cycle the value shown
on the display (A) flashes if the temperature
of the water in the well is less than that set,
or remains constantly on if the temperature
is at or above the set level.
A
8 - Keep the key (E) pressed (about 5 seconds)
until the buzzer sounds. The value on the dis-
play will stop flashing.
Important
The value which was modified is deleted
from the appliance's memory and the new
value set is saved.
9 - Press key (D) to start the cooking cycle.
- 10 -
H
L
H
L
D
IDM-39617800400.
E
IDM-39617800400.
Publicidad
