Descargar Imprimir esta página

Angelo Po 10CP1EA Manual De Uso E Instalación página 41

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CLEANING INSTRUCTIONS
Since the appliance is used for preparing foods for
human consumption, special care must be paid to
everything relating to hygiene, and the appliance
and the entire surrounding environment must con-
stantly be kept clean
Important
Before starting any cleaning operation, cut
off the electricity supply using the master
switch and allow the appliance to cool.
The precautions which follow are also important.
Caution - warning
When using detergents, rubber gloves, pro-
tective mask and safety goggles must be
worn in accordance with the relevant safety
regulations.
1 - Clean all parts of the appliance with warm water,
food-approved detergents and non-abrasive ma-
terials only.
CLEANING THE WATER LEVEL SENSOR ELECTRODES
Proceed as follows.
1 - Raise the electrode holder (A) without undoing
the screw (B) which secures the safety cover of
the electrical components.
Caution - warning
Take care over the connection cable (C).
2 - Clean the electrode holder (A) and the elec-
trodes (D) with a non-abrasive sponge and a
food-approved detergent.
3 - Rinse thoroughly to remove all residues of the
product used and dry.
4 - Rinse the guide tube of the electrode holder (E)
with drinking water.
Caution - warning
The guide tube of the electrode holder is in
communication with the cooking well. Do not
allow dirt or chemicals to enter the tube.
2 - Thoroughly clean all parts which come into di-
rect or indirect contact with foods and all sur-
rounding areas.
3 - After use, clean the accessories with a suitable
grease-remover product. If possible, wash in
the dishwasher.
Caution - warning
Never use products containing substances
harmful or hazardous for health (solvents, pe-
troleum spirits, etc.).
4 - Rinse the surfaces with the spray gun and dry
them.
5 - Pressurised water jets may only be used on ex-
ternal parts.
6 - Take special care not to damage stainless steel
surfaces. In particular, avoid the use of
corrosive products and do not use abra-
sive materials or sharp tools.
7 - Remove food residues immediately be-
fore they set.
8 - Remove the limescale deposits which
may form on some of the appliance's sur-
faces.
D
C
5 - Clean the cooking well and empty it to remove
any cleaning residues (see page 15).
6 - Replace the electrode holder (A).
- 15 -
B
A
E
IDM-39617802601.tif
English
IT
GB
DE
FR
ES

Publicidad

loading

Este manual también es adecuado para:

12cp1ea18cp2ea