Publicidad
Idiomas disponibles
Idiomas disponibles
The coffee is too
cold
The coffee is too hot
The machine does not
dispense steam
1. The machine had
not reached the correct
temperature
2. The filter holder had
not been pre-heated
3. The cups have not
been preheated
4. The thermostat is
not working within the
required range
1. The thermostat is
not working within the
required range
1. The circuit has not
been filled
2. The hole at the end
of the steam nozzle is
clogged
3. No water in the tank
4.Possible presence of
limescale in the hydraulic
circuit
28
1. Follow the instructions
given in section 4.1– 4.2
2. The filter holder should
be heated at the same
time as the water, see
section 4.1– 4.2
3. Heat the cups properly
on the cup warmer (5)
4. Contact an authorised
service centre
1. Contact an authorised
service centre
1. See section 4
2. Clean the hole with a
needle
3. See section 4
4. Contact an authorised
service centre
Publicidad
