SCHUBERTH E1 Manual Del Usuario página 12

D. THE HELMET
3. ANATOMY OF THE HELMET
Shield
Face shield
Reflective panels
Sun visor
Inner lining
Head ventilation
Face shield ventilation
Chin ventilation
Chin bar release
4. OUTER SHELL
The outer shell of the E1 helmet combines an aerodynamically optimal shape
with consistent protection. It consists of a special glass-fibre
reinforced duroplastic matrix developed by SCHUBERTH, which gives the
helmet the high level of strength needed for your protection*.
* The helmet is designed to provide the safety performance required by the United
States DOT 218 Standard in combination with the European ECE R 22.05 Standard
Caution:
The safety helmet is designed to absorb the effects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.
5. INNER SHELL
For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding
of the main body provides better absorption and dissipation of impact forces
and gives you the highest level of safety. The large side panels ensure the
helmet sits optimally and comfortably.
12
Integrated antennas
Head ventilation
Inner shell
Anti-fog lens
Shield unlocking/
Visor mechanics
Position lever for shield
Outer shell
Retention system
(with anti-roll-off system)
Operating slide for
sun visor
Chinstrap buckle