SCHUBERTH E1 Manual Del Usuario página 49

3. SAFETY ADVICE –
MODIFICATIONS / ACCESSORIES
Warning:
Do not modify your helmet.
Original parts (especially on the outer shell, inner shell and retention
system) must not be modified or removed. The fitting of non-genuine,
non-recommended parts can partially or completely counteract the
protective function of the helmet and invalidate the DOT approval with
all guarantee and insurance claims.
Warning:
Use only original parts.
Use only replacement parts and accessories expressly made for your
helmet by SCHUBERTH!
Warning:
Never modify your helmet!
It is very dangerous to drill holes or to cut the shell and/or the shock
absorbing liner. Modification can seriously weaken the helmet. Modifying
the retention system weakens it, increasing the likelihood of snapping
during impact. Removing parts such as the mouth guard or rubber face
molding can expose edges that may injure you in an accident. Always
use approved SCHUBERTH parts when replacing shields, screws, or
any other parts. A weakened helmet will not provide head protection.
Warning:
Do not repaint the helmet!
Repainting of your helmet is not recommended. Paint and thinner can
damage the helmet and reduce its ability to provide head protection in
an accident.
Caution:
Do not carry the helmet on the motorcycle's helmet storage lock
while riding in order to avoid exhaust pipe burns, tire abrasion, and strap
damage to the helmet.
Caution:
Keep the helmet outside the reach of pets to avoid the helmet being
damaged by chewing, scratching or other mistreatment.
EN
49