SCHUBERTH E1 Manual Del Usuario página 28

D. THE HELMET
13. TINTED SUN VISOR
SUN VISOR
The sun visor is tinted grey and has a 3D shape. Thanks to the sun visor's
1.5 mm thickness, it provides protection against small stone chips or insects.
It does not provide protection against other hazards. It is also scratch-
resistant and offers effective UV protection with its special polycarbonate
structure.
OPERATION
The sun visor is operated by means of the slide
positioned on the left in the chin area, which is
easy to use even when wearing gloves.
Moving the slide towards the back lowers the
sun visor, moving it forwards retracts the sun
visor inside the inner helmet shell and locks it
in position.
The sun visor can be operated irrespective of
the position of the face shield.
Note:
Only use the slide to operate the sun visor.
Caution:
Never ride in the dark or in conditions of poor visibility with the sun
visor down. Always raise the sun visor before entering a tunnel.
Caution:
Riding without the face shield or with an open face shield can result
in injury to the eyes and face from stones, dust, insects and other
flying objects. The sun visor, when lowered, will offer a certain amount
of protection from light impact from stones or insects but does not
provide protection against all hazards.
28